Product Categories

Contact Information

ADD:NO. 388, Yangqiao Industrial Park,Linan District,Hangzhou City,Zhejiang Province,China

Whatsapp: +8615988407388

TEL NO: +0086 0571 87169872/87169873

FAX NO: +86-0571-87169573

EMAIL: chinahzdayang@yeah.net

WEB: www.dayangwelding.com

High Quality Cutting Wheels For Material (100X3X16mm) 42c

High Quality Cutting Wheels For Material (100X3X16mm) 42c

1. High metal removal rate. 2. Less material loss, noise and dust, few sparks. 3. Long-life durability. 4. Low vibration and high stability for comfortable grinding or cutting. 5.2 sheets of fiberglass for durability and safety, 6. Made by abrasive and special resin, has high tensile, shock and bending strength. 7. Strict quality testing, good after-sale service.

Chat Now
Product Details
Product Description

DEPRESSED CENTER CUTTING WHEELS
Size(mm)InchPcs/CtnG.W.MeasMax.SpeedUsage
42C
100×3×16
4X1/8X5/84001944X22X2180M/SFor cutting and grinding of stone,cast iron,leather etc.
42C
115×3×22
4.5X1/8X7/82001525X23X25
42C
125×3×22
5X1/8X7/82001826X23X26
42C
150×3×22
6X1/8X7/81001332X23X16For cutting and grinding of ordinary metals,carbonsteel,steely alloy,weld seams.












Product Details
1. High metal removal rate.
2. Less material loss, noise and dust, few sparks.
3. Long-life durability.
4. Low vibration and high stability for comfortable grinding or cutting.
5.2 sheets of fiberglass for durability and safety,
6. Made by abrasive and special resin, has high tensile, shock and bending strength.
7. Strict quality testing, good after-sale service.

our services:
1: Accept OEM order.
2:Free SAMPLE.

Product Shows
Depressed Center Cutting Wheels for Material (100X3X16mm) 42cDepressed Center Cutting Wheels for Material (100X3X16mm) 42cDepressed Center Cutting Wheels for Material (100X3X16mm) 42c

How to use it ?

       (1) should be fastened with a chuck, the outer diameter of the two chuck size must be equal. Between the two chuck and grinding wheel face, should be placed on the thickness of 05 to 1 mm of cardboard, and chuck in the external circumference of the exposed 1 to 2 mm.
    (2) the gap between the wheel flange and the flange to be uniform, when the grinding wheel hole hours, the grinding wheel hole repair scraping, grinding wheel is prohibited into the flange. When the grinding wheel hole is large, then the uniformity between the grinding wheel and the flange paper.
    (3) tighten the wheel, only to allow the use of special manual nut wrench to tighten the nut, is strictly prohibited to use the complementary fixture or beating tools, if there are multiple compression screws should be tightened in diagonal order, tightening force should be uniform. Tightening, should pay attention to the degree of tightness of the nut, pressed to sufficient to bring the wheel does not produce the degree of sliding is appropriate to prevent compression caused by excessive grinding wheel damage.
    (4) The outer diameter of 125 mm and above the wheel, installed after the chuck should be static balance, and then installed on the grinding machine to repair round, trimmed again after the balance, qualified before use.
    (5) grinding wheel installed on the grinder, the flange hole and the spindle should be wiped clean.
    (6) The new grinding wheel after the first installation in the grinding machine spindle, you must have a protective case of idling, idling time of not less than 5 minutes. When idling, the operator should stand in the direction of sand rotation side, is strictly prohibited standing in front or tangent direction.
    (7) Absolutely not allowed to exceed the grinding wheel under the conditions of the grinding speed.
    (8) before the wheel stops turning the coolant should be closed, the wheel to rotate for 5 minutes, so that grinding fluid rejection to do.

FAQ:
Q1: Do you have any safe certifications?
A1:Yes, we have ISO 9001, SGS dand CE.

Q2:What's your application for cutting & grinding discs?
A2:Used for metal, stone, stainless steel, carbon steel, cast iron ,leather etc.

Q3:What package do you use? Can accept OEM order?
A3:Usually, packing as shrink + neutral inner box + standard export carton, we also accept OEM order, label and package as customers' requirements.

Q4: Can you provide free samples?
A4:Yes, we can provide free samples, but samples freight belongs to clients.

Q5:What's your daily output? How long is delivery time?
A5:100000 pcs per day for daily products output, 15-25 days after confirmed order.



Related Products
Inquiry